100% brand new and high quality
Charge module- Linear charging.
It has MICRO USB female
It still retain the input voltage wiring solder joints, can be very convenient to DIY
Current- 1A adjustable.
Charge precision- 1.5%.
Input voltage- 4.5V-5.5V.
Full charge voltage- 4.2V.
Led indicator- red is charging Blue is full charged.
Input interface- micro USB.
Work temperature- -10℃ to +85℃.
Inversed polarity- NO.
Size: 27mm X 17mm.
1 x 18650 batteries (6000 mAh) you can charge with this charger in parallel at the same time
Only one 18650 batteries (6000 mAh) you can charge with this charger in parallel at the same time
1. Ampere meter can only be connected to 5v input end of the module.
2. It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000 mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to chip.
6. NO Reversal polarity.
2pcs 5V Micro USB 1A 18650 Lithium Battery Charging Board Charger Module