The EMBEDDED version of Mega 2560 CH340G/ATmega2560 – compatible with Arduino Mega 2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G.
Ultra-compact size 38x55mm. It is a good solution, to make your final project on solder proto-board. Board for functionality similar to the Arduino Mega 2560. It is embedded board, but the same stable, and uses the original chips ATmega2560 (16 MHz).
The board used the chip CH340G as converter UART-USB. When you work in the frequency 12MHz, giving a stable result of data exchange (need install drivers to computer).
Mega PRO (Embed) 2560 CH340G / ATmega2560 – connects to the computer via micro USB cable (used for almost all Android smartphones). You can supply power to board through the MicroUSB connector or to power pinheaders. The voltage regulator (LDO) can deal with incoming voltage from 6V to 9V (peack 12V) DC. Output current for 5V – about 800mA, for 3.3V – about 800mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
Detail page of product: https://robotdyn.com/mega-2560-pro-embed-ch340g-atmega2560-16au.html
On detail page, you can find:
PinOut Diagram: (PDF) – (JPG)
Mechanic Diagram: (PDF) – (JPG)
Driver: (Win) – (Linux) – (Mac OS) -(Android)
Instruction(PDF) for installation
Library for Eagle CAD
Input Voltage (recommended)6-9V
Input Voltage (limit)12V
Digital I/O Pins54 (of which 15 provide PWM output)
Analog Input Pins16
DC Current for 5V Pin800 mA
DC Current for 3.3V Pin800 mA
Flash Memory256 KB of which 8 KB used by bootloader
Clock Speed16 MHz
1 x Arduino Mega 2560 PRO Embedded, MCU mini ATmega2560, micro USB CH340G